|
STROBES
The Strobe is a critical tool for use as an emergency location beacon.
L198S |
PHANTOM DIVE LIGHTS | |
Item #: L197HM10 10 W HID light shown with 4 AH canister. Burn Time: 4.5 hrs. Complet system as showen Charger enclosed in price Price: DKK 6.337,- |
Want the brightest, lightest most reliable dive lights on the market? OMS ® has completely redesigned all components of the 10 w and 21w HID lighting systems for 2003/2004. The heads are designed to be the smallest in the world, incorporate the ON/OFF switch (This eliminates leak prone rubber covered toggle switches), have special dampening to protect the bulb and have a proprietary front lense retention system to prevent leakage. Specially designed compression fittings add to the water tightness of these units at depth (max. Depth rating for the 10w is 1700 FSW and 1500 FSW for the 21W, as tested), and eliminate the need for makeshift hot glues and heat shrink-tubing that other manufactures regularly use. The new SMART 4 Ah and 8 Ah NiMH batteries utilize Thermisters and special high cycle "Click" devices to protect against thermal run-aways and overcharging. The Charger has an optional plug kit that allows use in the: UK, Europe, and Australia, in addition to the standard USA plug. The light head can be held in your hand or you can affix the optional Goodman Handle (Fig. 1). Additionally there is an area to fasten a swivel snap to your light so that the light head can be mounted to your harness D-Ring. Waist mounting is also possible by utilizing a piece of webbing mounted between the (2) stainless steel bands. Well thought out, expertly engineered and with no compromises. |
WHY OMS ® DIVELIGHTS SUCCEED WHILE OTHERS FAIL OMS ® uses high reliability engineered connectors rated to 2000+ feet with a solid water blocked electrical cord rather than plumbing fittings, hot glues and shrink tubing. Our optional micro lens that changes 6 degrees to 15 degrees for superb center to edge beam uniformity provides excellent video lighting as it eliminates beams with black holes. The OMS ® reflector maximizes lamp output while "they" use an inefficient "off the shelf reflector", that reduces light output. OMS® offers an international charger. "They" use USA chargers that require aftermarket adapters and plugs for overseas use. OMS® has engineered a unique mechanical light head switch with a safety switch lock (patent pending) to prevent accidental " turn on" to prevent fires and "gear bag" meltdown. Our competitors use unreliable leak prone rubber covered toggle switches on the battery canister, that turn-on accidentally and do not have a safety switch lock. OMS® battery housings use high impact PVC that if dropped will not distort, dent or crack. Many competitors use brittle plastic or dent prone stainless steel canisters (drop it, it may deform and not seal).All Phantom light heads and canister caps are Mil Spec Hard Coat anodized while our competitors continue to use soft black or silver anodizing! OMS ® eliminates (2) points of failure by machining in the male threaded nipple on the light head and canister cap. Conversely all of our competitors lights have (2) extra points of failure at the point where the cord enters the light head and canister areas due to extra holes. OMS ® completely wet pot pressure tests every light. Do "They"? Finally the OMS ® revolutionary SMART TM battery technology incorporates themisters (to prevent fires) and click devices to prevent overcharging! OMS ® the best that money can buy. |
Item # L197HM21 21W HID Optional L-Goodman Handle (figure 1) |
Item #: L197HM21 21 W HID light shown with 8 AH canister. Burn time: 4.0 hrs Expected Availability: Fall 2004 Price on request. |
HID Lights | HIGH INTENSITY DISCHARGE LIGHTS | ||||||
Light Type | Item # | Bulb Type | BURN TIME * | Ave. bulb life ** | Output | Focus | Beam Angle |
Phantom 10 W HID | L197HM10 | 10 W HID | 4.5 hours | 1000 hrs. | 450 Lm | Fixed | 6 or 12 degrees |
Phantom 21 W HID | L197HM21 | 21 W HID | 4.0 hours | 1000 hrs. | 850 Lm | Fixed | 5 degrees |
Note: Phantom 21 W HID light design is being finalized, specifications are subject to change |
Battery Specifications: | ||||||||
Light Type | Item # | Capacity | Protection | Type | ||||
Phantom 10 W HID | L197HM10 | 13.2V, 4Ah | Thermister / Click | No Memory NIMH | ||||
Phantom 21 W HID | L197HM21 | 13.2V, 8Ah | Thermister / Click | No Memory NIMH | ||||
Battery Canister Specifications (Single Canister battery system is standard for HID lights): | ||||||||
Mounting | Item # | Depth Rating **** | Connectors | Material | Cord | Dimensions | Buoyancy | |
2 stainless steel bands with integral D-Ring | L197HM10 | 1700 FSW | Specially engineered | PVC | 4' long | 7.5"L x 2.37" O.D. | 1.2 lbs Neg. | |
L197HM21 | 1500 FSW | Specially engineered | PVC | 4' long | 12.0"L x 2.37" O.D. | 2.2 lbs Neg. | ||
Charger Specifications for HID Lights: | ||||||||
Type | Item # | Primaries | Secondaries | Charge time *** | Float | Charger Approval | ||
US & International | RL203 | 90-260VAC | 18VDC @ 1.11 A | 8 hrs. + | No | Battery OEM, CE & UL | ||
US & International | RL203 | 90-260VAC | 18VDC @ 1.11 A | 16 hrs. + | No | Battery OEM, CE & UL | ||
Canister Mounting Options : | ||||||||
Backplate | Waist | Nested between double cylinders | Nested at manifold area | Butt mount | ||||
Phantom 10 W HID | Yes | Yes | Yes | Yes | Yes | |||
Phantom 21 W HID | Yes | Yes | Yes | Yes | Yes |
Item #: RL - 203 |